Acoustic Control for Concerts and Outdoor Events
Environmental impact study, sound measurement, limitation and acoustic monitoring for concerts, festivals and outdoor events.
Sanction prevention (Law 37/2003, RD 1367/2007) through prior environmental impact studies and real-time sound level control. Madrid and across Spain.
Our services
Comprehensive acoustic control solution
We cover every phase of noise control at your event: from the preliminary study to the final report.
Environmental impact study
Electroacoustic modelling with EASE and immission study with CadnaA. Prediction of noise levels in residential areas to comply with applicable regulations.
Level measurement
Measurements with our own equipment in the audience area and nearby facades. Continuous recording throughout the event for monitoring and correction.
Limiter installation
Approved limiters on sound systems to control permitted levels, with recording as compliance certification.
Analysis and reports
Measurement data analysis and recordings for event evaluation. Technical reports for appeals in case of sanctions.
Electroacoustic model
Prevention: the most effective tool
The increase in concerts and shows in open spaces has heightened awareness about noise pollution in nearby residential areas.
Spanish Law 37/2003 and RD 1367/2007 establish the acoustic quality standards that must be met. A prior environmental acoustic impact study indicates which location, setup and levels are most appropriate to avoid nuisance and sanctions from authorities. The steps to achieve these objectives are:
Project definition
Detailed description of the event: location, size, sound systems and technical characteristics.
Impact identification
Assessment of potential environmental, social and economic impacts of the event on the area.
Analysis of alternatives
Study of different setup configurations and orientations to minimise environmental impact.
Mitigation measures
Proposal of specific measures to minimise the identified negative impacts.
Consultation and coordination
Coordination with organisers, local authorities and stakeholders.
Final report
Complete documentation with all information for review by the relevant parties.
Methodology
Step-by-step technical process
Each project phase follows a technical rigour that ensures accurate results and valid documentation.
Electroacoustic study
Modelling with EASE
Using EASE software, sound sources are modelled with directivity and coverage adjusted in the audience area to obtain the most accurate assessment of the levels to be applied.
This study allows us to adjust levels and coverage to achieve the lowest noise emission in nearby dwellings.
Study area model
System directivity
Environmental study
Analysis with CadnaA
Using the approved CadnaA software, the environmental impact study is carried out in nearby residential areas to comply with applicable noise regulations.
Noise immission in the study area with level graphs at ground level and at dwelling facades.
Study results
Noise immission maps
Graphic visualisation of predicted noise levels at ground level and on the facades of nearby dwellings. These maps allow identification of the most affected areas and adjustment of the sound system design accordingly.
Monitoring and measurement
Real-time measurements
Measurements are taken in the audience area and on nearby facades during both the sound system setup and the event itself.
Using our own measurement systems, continuous recordings are made for monitoring and to take corrective action if necessary.
Source limitation
Approved limiters
Installation of approved limiters to control sound systems to permitted levels, with recording as compliance certification.
Analysis and report
Evaluation and documentation
Analysis of measurement data and recordings for overall evaluation of the event.
Creation of a detailed technical report valid for appeals in case of sanctions.
Applications
Event types
Experience in all types of outdoor events and venues with acoustic impact.
Outdoor concerts
Acoustic emission control at concerts and performances in parks, squares and open venues.
Music festivals
Multi-stage acoustic management with simultaneous monitoring of multiple sound sources over several days.
Corporate events
Sound control at presentations, conventions and business events with amplification systems.
Municipal festivities
Noise management at local festivals and municipal events with impact on residential areas.
Sports competitions
Sound level monitoring at sporting events with public address and entertainment systems.
Shows and theatre
Acoustic control at outdoor performances and shows with sound effects.
Why choose us?
Key advantages
Prevention over sanction
A prior study prevents sanctions and legal problems during and after the event.
Approved software
EASE for electroacoustics and CadnaA for environmental impact. Industry-standard tools.
Own measurement equipment
LEVELAD measurement system for continuous recording with real-time alerts and report generation.
Approved limiters
Installation of limiters with documentary evidence as regulatory compliance certification.
Complete technical report
Detailed documentation valid for authorities, appeals and defence against sanctions.
Proven experience
Years of experience in acoustic control of events with all types of configurations and regulations.
Frequently asked questions
We answer your questions
Is an acoustic impact study mandatory for a concert?
It depends on local regulations. In many cities, the council requires an environmental impact study as a prerequisite for granting the event activity licence. In any case, having one is the best way to prevent sanctions.
What software is used for the studies?
We use EASE (Enhanced Acoustic Simulator for Engineers) for electroacoustic modelling of sound sources, and CadnaA (Computer Aided Noise Abatement) for environmental impact studies in residential areas. Both are industry-standard approved software.
How far in advance should the study be requested?
We recommend a minimum of 2-4 weeks before the event to carry out the electroacoustic study, the environmental study and prepare the complete documentation for the authorities.
What happens if limits are exceeded during the event?
Our measurement system detects any exceedance in real time. The monitoring staff can instruct the sound engineer on the necessary correction. Additionally, the installed limiters prevent levels from exceeding the established thresholds.
Can the technical report be used to appeal sanctions?
Yes. The report includes all time-stamped measurement data, the configurations used, acoustic dispersion maps and compliance documentation. It is a valid technical document for submission as evidence in administrative appeals.
Can measurement alone be hired without the prior study?
Yes. We offer each service independently: electroacoustic study, environmental study, event measurement and monitoring, limiter installation and report preparation. You can contract only what you need.